By

TRACE RINALDI TTKK

Blade Length: 4.25″

Overall Length: 9″

Blade Steel: S30V

Blade Finish: Black Powder Coating

Guard: Integral single guard

Handle Material: Black Micarta

Sheath: Custom Made Kydex sheath

Comments: Trace’s knives are extremely hard to come by. Thumb serrations along the top, single edge, full tang and multiple lanyard holes.

SOLD

SHAWN ELLIS BEAR PEN BOWIE

Blade Length: 9.5″

Overall Length: 14″

Blade Steel: W-2 with Hamon

Guard: Stainless Steel

Handle Material: Curly Koa

Sheath: Custom made leather sheath

Comments: Shawn is an ABS Journeyman Smith. Great handle ergonomics and balance! A knife you could use all day without fatigue.

Price: $875.00 – NOT IN STOCK

WILL ZERMENO AZRAEL PUNISHER

Blade Length: 3.75″

Overall Length: 8″

Closed Length: 4.5″

Blade Steel: S35VN

Blade Finish: Satin

Bolster Material: Titanium

Bolster and frame finish: Bead blast

Handle Material: Carbon fiber

Opener: Flipper

Lock: Frame

Clip: Tip up carry

Comments: Punisher logo laser cut into the bolster

Price: $425.00 – NOT IN STOCK

LANDON ROBBINS CAMP KNIFE

Blade Length: 10″

Overall Length: 14.75″

Blade Steel: W-2

Blade Finish: Satin with Hamon

Guard and Pommel Material: Stainless steel

Handle Material: Sambar Stag

Sheath: Custom made leather sheath by Kenny Rowe

Comments: Balance is weight slightly forward, as it should be on a knife like this. Excellent fit and finish. Landon is an ABS Journeyman Smith.

Price: $750.00 – NOT IN STOCK

MIKE OLIVE FIGHTER

Blade Length: 6.75″

Overall Length: 12.25″

Blade Steel: 1084

Blade Finish: Satin

Guard Material: Stainless steel

Handle Material: Desert Ironwood

Sheath: Custom made leather sheath

Comments: Great handle and ergonomics. Mike is an ABS Journeyman Smith.

Price: $550.00 – IN STOCK

SCOTT COOK LOCHSA

Blade Length: 3.625″

Overall Length:8.25″

Closed Length: 4.58″

Blade Steel: S30V

Blade Finish: Satin

Frame Finish: Contoured, Bead blast on flats and satin finish on contours

Frame Material: Titanium

Opener: Thumb Stud

Lock: Frame

Clip: Tip up carry

Comments: Brand new from Scott in 2003. Never carried, used or sharpened. Comes with original box and information card.

SOLD

MIKKEL WILLUMSEN URBAN TACTICAL FRAME LOCK FOLDER

Blade Length: 3.5″

Overall Length: 8″

Closed Length: 4.5″

Blade Steel: CPM-154

Blade Finish: Two-tone Satin and Stonewash

Handle Material: Black and yellow G-10

Frame Material: Bead-blasted Titanium

Lock: Frame

Opener: Ambidextrous thumb groove

Clip: Tip-down with bead blast finish

Comments: Smooth opening and excellent lock up. Features IKBS!

Price: $350.00 – IN STOCK

TIM STEINGASS AK UTILITY

Blade Length: 4.5″

Overall Length: 8.75″

Blade Steel: D2

Blade Finish: Satin

Guard Material: Stainless Steel

Handle Material: Black Micarta

Sheath: Custom made leather sheath by maker.

Comments: Full tang, thumb serrations on top of blade, Stainless Steel tube-lined thong holes, and contoured handle for great ergonomics. Designed to decrease hand fatigue with extended use as a Hard Use Field knife.

Exclusively through Robertson’s Custom Cutlery.

SOLD

GREG LIGHTFOOT MINI PIT BOSS NECK

Blade Length: 3.”

Overall Length: 6.5″

Blade Steel: A-2

Blade Finish: Black Coated

Handle Material: Textured Black G-10

Sheath: Kydex sheath with Tek-Lok to be worn on belt or around your neck

Comments: Previously owned, slight mark on blade where Kydex sheath rubbed off coating.

SOLD

CLAUDIO & ARIEL SOBRAL SAN MAI & STAG FIGHTER

Blade Length: 7″

Overall Length: 12″

Blade Steel: San Mai

Blade Finish: Satin

Guard Material: 416 Stainless Steel

Handle Material: Stag

Sheath: Custom made leather sheath by Marcelo Sobral

Comments: Sleek with great balance. Nice!

Price: $1,000.00 – NOT IN STOCK

BOB TERZUOLA / MICROTECH ATCF D/A #0009

Blade Length: 3 7/8″

Overall Length: 8.75″

Blade Steel: 154-CM

Blade Finish: Satin

Bolster: Titanium with bead blast finish

Handle Material: Ivory Micarta

Opener: Ambidextrous thumb wheel and bolster release

Lock: Liner

Clip: Tip-up carry

Comments: This knife features the hand ground “Dagger” logo, Serial #0009 04/2004. Comes with Microtech nylon pouch and Terzuola info card and plastic pouch. New in box with operations and owners manual.

SOLD

SCHUYLER LOVESTRAND IVORY F-1 SUB-HILT

Blade Length: 7.25″

Overall Length: 12.25″

Blade Steel: 154CM

Blade Finish: Mirror

Guard & Sub-Hilt Material: Stainless Steel

Handle Material: Mammoth Ivory Bark

Sheath: Custom made leather sheath

Comments: Full tapered tang, sharpened top edge, red micarta liners

Schuyler is one of the best fixed blade makers in the world!

SOLD

BILL LUCKETT TAC II 40th ANNIVERSARY DAGGER

Blade Length: 6″

Overall Length: 10.75″

Blade Steel: CPM 154

Blade Finish: Bead blast

Guard Material: Stainless Steel

Handle Material: Black Micarta

Sheath: Kydex Lined Cordua Nylon

Comments: Limited Edition 40th Anniversary. Concave grind on back side of blade, thong holes on guard and handle.

Price: $850.00 – IN STOCK

CRUSADER FORGER (TRIDENT KNIVES) VIS METRO

Blade Length: 3.5″

Overall Length: 8.5″

Closed Length: 5″

Blade Steel: S30V

Blade Finish: Black and gray Tiger stripe pattern

Frame: Grooved all titanium with black and gray Tiger stripe pattern

Opener: Thumb hole or Flipper

Lock: Frame

Clip: Tip up carry

Comments: Extremely overbuilt folder. Some minor handling marks.

SOLD

JIMMY LILE ORIGINAL SLY II

Blade Length: 9″

Overall Length: 14″

Blade Steel: D-2

Blade Finish: Two-Tone Satin and Mirror

Guard Material: Bead blasted 416 Stainless Steel

Handle Material: Stainless steel tube, Aluminum butt cap (with compass inserted), cord wrapped handle

Sheath: Original Johnson Sheathery custom made leather sheath.

Comments: This is an original Lile Sly II, not one of the copies that is currently being sold by another maker.

SOLD

JIM SISKA M16 SUB-HILT DI FIGHTER

Blade Length: 8.75″

Overall Length: 13.75″

Blade Steel: CPM 154

Blade Finish: Satin

Guard Material: 416 Stainless Steel

Handle Material: Desert Ironwood

Sheath: Custom made leather sheath

Comments: The crisp and clean lines of this knife are sure to please the most discriminating custom knife buyer.

Price: $1,250.00 – IN STOCK

VAUGHN NEELEY DA DAGGER

Blade Length: 8″

Overall Length: 13″

Blade Steel: 440C

Blade Finish: Mir

Guard and Pommel Material: Stainless steel

Handle Material: Black Micarta

Sheath: Custom made leather sheath

Comments: Full double edge, ¼” stock, serial number 002

SOLD

TODD BEGG PESSIMIST PROTOTYPE FIGHTER

Blade Length: 8″

Overall Length: 13″

Blade Steel: N690 Bohler

Blade Finish: Sniper Gray Cerakote

Guard: Integral double guard

Handle Material: Textured and contoured black Micarta

Sheath: Kydex sheath with Tek-Lok and a Kydex sheath set up with nylon to be worn as a shoulder rig.

Comments: There were two sets of these prototypes made; an A and B set. Each set had one 6″, 7″ and 8″ version and all the blades were ground the same.

This one is marked PROTOTYPE B. It is the largest knife in the B series. Only two sets of the custom versions were made!

Price: $1,250.00 – IN STOCK

CLAUDIO & ARIEL SOBRAL STAG BOWIE

Blade Length: 10″

Overall Length: 15″

Blade Steel: San Mai

Blade Finish: Satin

Guard Material and Pommel: 416 Stainless Steel

Handle Material: Stag

Sheath: Custom made leather sheath by Marcelo Sobral

Comments: Great balance and light weight.

Photo: Chuck Ward

Price: $1,300.00 – NOT IN STOCK

SHAWN ELLIS PRESENTATION FIGHTER

Blade Length: 6.75″

Overall Length: 11.75″

Blade Steel: 1084

Guard: Stainless Steel

Handle Material: Desert Ironwood

Sheath: Custom made leather sheath

Comments: Shawn is an ABS Journeyman Smith. Great handle ergonomics and balance! A knife you could use all day without fatigue.

Price: $650.00 – NOT IN STOCK

JIM SISKA COCOBOLO M16 FIGHTER II

Blade Length: 7.25″

Overall Length: 12.25″

Blade Steel: CPM 154

Blade Finish: Satin

Guard Material: 416 Stainless Steel

Handle Material: Cocobolo Wood

Sheath: Custom made leather sheath

Comments: The crisp and clean lines of this knife are sure to please the most discriminating custom knife buyer.

Price: $900.00 – IN STOCK

MICK STRIDER CUSTOM SNG

Blade Length: 3.5″ Nightmare grind

Closed Length: 4.75″

Overall Length: 8.5″

Blade Steel: S30V

Handle Material: OD Green G-10

Frame Material: Titanium

Opener: Ambidextrous thumb hole and thumb studs.

Lock: Frame

Clip: Tip-Up

Comments: Flame style finish on the frame, and Ti pocket clip. Crosshatch grid finish on the blade. Hinderer stabilizer on the frame, lanyard with Starlinger Strider bead. Previously owned in excellent condition. Comes with a custom black leather sheath.

SOLD

DUANE DWYER (DDC) CUSTOM SNG

Blade Length: 4″ Chisel ground blade

Closed Length: 4.75″

Overall Length: 9.1″

Blade Steel: D2

Handle Material: Fluted Black G-10

Bolster Material: Fluted Titanium

Frame Material: Titanium

Opener: Ambidextrous thumb studs.

Lock: Frame

Clip: Tip-UP

Comments: Flame style back spacer, pocket clip and bolsters Serrated thumb ramp. Concertina wire design coated blade. Previously owned in excellent condition.

SOLD

DUANE DWYER (DDC) CUSTOM SNG

Blade Length: 3.5″ Chisel ground blade

Closed Length: 4.75″

Overall Length: 8.5″

Blade Steel: D2

Handle Material: Brown G-10

Frame Material: Titanium

Opener: Ambidextrous thumb hole and thumb studs.

Lock: Frame

Clip: Tip-UP

Comments: Serrated thumb ramp, two-tone finish on blade and Ti frame. Satin finish concertina outline and bead blast finish. Comes with a custom Greg Everett golden brown leather sheath. Previously owned in excellent condition.

SOLD

JIM SISKA FORGED HUNTER

Blade Length: 2.25″

Overall Length: 6.75″

Blade Steel: 1084

Blade Finish: Satin

Handle Material: Desert Ironwood

Sheath: Custom made leather sheath by maker

Comments: Serrated thumb ramp. This is one of Jim’s limited blades that he has forged. (The logo is marked accordingly.) The crisp and clean lines of this knife are sure to please the most discriminating custom knife buyer.

Price: $350.00 – IN STOCK

TRACE RINALDI LEO

Blade Length: 4.25″

Overall Length: 10″

Blade Steel: S30V

Blade Finish: Bead blast

Guard: Integral single guard

Handle Material: Black Micarta

Sheath: Custom Made Kydex sheath

Comments: Trace’s knives are extremely hard to come by. Thumb serrations along the top part of the clip, the bead blasting has been removed from taking the knife in and out of the sheath Trace’s shop in. Single Edge, Full tang and multiple lanyard holes.

SOLD

GREG LIGHTFOOT PIT BOSS

Blade Length: 3.5″

Overall Length: 8.75″

Closed Length: 4.5″

Blade Steel: CPM-154

Blade Finish: Satin

Frame Material: Titanium

Handle Material: Lightning Strike Carbon Fiber and Desert Ironwood

Opener: Flipper

Lock: Liner

Clip: Tip-up carry

Comments: Carved flipper opener, Carbon Fiber clip

SOLD

GAVCO FRAMELOCK FLIPPER

Blade Length: 3.75″

Overall Length: 8.5″

Closed Length: 4.75″

Blade Steel: AEB-L

Blade Finish: Tumble finish with copper wash

Frame Material: Titanium

Handle Material: M3 Composite

Opener: Flipper

Lock: Frame

Clip: Tip-up carry

Comments: Carved flipper opener and Carbon Fiber clip.

SOLD

JIM SISKA DAMASCUS M16 SUB-HILT

Blade Length: 8.5″

Overall Length: 13.5″

Blade Steel: Jerry Rados Twist Pattern Stainless Steel Damascus

Blade Finish: Satin

Guard Material: 416 Stainless Steel, anodized a silver/blue color. Very striking!

Handle Material: Stag

Sheath: Custom made leather sheath

Comments: The crisp and clean lines of this knife are sure to please the most discriminating custom knife buyer.

SOLD

JEFF HARKINS TRITON OTF

Blade Length: 3.75″

Overall Length: 8.6″

Blade Steel: ATS-34

Handle Material: Titanium Frame with two tone finish and African Blackwood overlays.

Opener: Button activates and retracts the blade

Clip: No Clip

Comments: Jeff was the first custom maker to successfully build the first OTF (Out The Front) that retractable blade.

SOLD

JIM SISKA M16 COCOBOLO FIGHTER I

Blade Length: 8.5″

Overall Length: 13.5″

Blade Steel: CPM 154

Blade Finish: Satin

Guard Material: 416 Stainless Steel

Handle Material: Cocobolo

Sheath: Custom made leather sheath

Comments: The crisp and clean lines of this knife are sure to please the most discriminating custom knife buyer.

Price: $975.00 – IN STOCK

VAUGHN NEELEY USN YORI TOSHI TANTO

Blade Length: 5-3/8″

Overall Length: 13.5″

Blade Steel: 440C

Blade Finish: Two tone Mirror on the hollows and bead blasted on the flat.

Guard and Pommel: Stainless Steel

Handle Material: Black Micarta

Sheath: Custom Made leather sheath

Comments: Serial Number 5 of 20.

SOLD

PHANTHOM STEELWORKS CHRIS MARTIN

Blade Length: 3.75″

Overall Length: 9.5″

Closed Length: 5.5″

Blade Steel: S35VN

Blade Finish: Mechanical Glacier Finish

Frame: Machined and Anodized Bronze color Titanium

Opener: Flipper

Lock: Frame

Clip: Tip-up carry, Machined and Anodized Bronze to match the frame.

SOLD

JIM MINNICK LDC-104 PROTOTYPE

Blade Length: 3.25″

Overall Length: 7.5″

Closed Length: 4.5″

Blade steel: ATS-34

Blade finish: Satin

Bolster: Titanium

Frame material: Titanium

Handle Material: Black G-10

Opener: Ambidextrous Thumb Wheel

Lock: Liner

Clip: Tip Down

Comments: This is the very first tactical folder ever made by Jim.

Price: $500.00 – IN STOCK

VAUGHN NEELEY SG FIGHTER

Blade Length: 7.5″

Overall Length: 12.5″

Blade Steel: 440C

Blade Finish: Micro bead blast

Guard and Pommel: Stainless Steel

Handle Material: Black Micarta

Sheath: Custom Made leather sheath with sharpening stone inserted in the back of the sheath

Comments: Double Edge, Full hidden tang, contoured guard, and handle features two finger grooves.

SOLD

CLAUDIO & ARIEL SOBRAL STAG BOWIE TS

Blade Length: 10″

Overall Length: 15″

Blade Steel: San Mai

Blade Finish: Satin

Guard Material & Pommel: 416 Stainless Steel

Handle Material: Stag

Sheath: Custom made leather sheath by Marcelo Sobral

Comments: Great balance and lightweight

Price: $1,325.00 – NOT IN STOCK

BOB TERZUOLA M30 BATTLE GUARD

Blade Length: 6″

Overall Length: 10.75″

Blade Steel: ATS-34

Handle Material: Black Micarta

Sheath: Custom Made Kydex sheath

Comments: Bob Terzuola’s classic design!

Price: $975.00 – IN STOCK

WILLEM STEENKAMP CHUTE

Blade Length: 4.25″

Overall Length: 9″

Blade Steel: N690

Blade Finish: Mirror

Guard Material: Stainless steel

Handle Material: Cocobolo

Sheath: Custom Made Leather Sheath

Comments: Double Edge, Full tapered tang with red tang liners, thong hole

Price: $450.00 – IN STOCK

TIM STEINGASS SILENT KOA FIGHTER

Blade Length: 7″

Overall Length: 12″

Blade Steel: CPM-164

Blade Finish: Mirror

Handle Material: Presentation Koa

Sheath: Custom made leather sheath

Comments: Full tapered tang, red liners, thong hole and sharpened clip

Price: $590.00 – IN STOCK

LES GEORGE DAMASCUS ESR

Blade Length: 2.625″

Overall Length: 6.625″

Closed Length: 4.78″

Blade Steel: Chad Nichols SS Damascus with w/XHP Core

Frame Material: Titanium

Handle Material: Titanium with grenade CNC image into the scale

Opener: Flipper

Lock: Frame

Clip: Tip up

Comments: According to Les this is a one of a kind! Features a lanyard with a Starlinger bead.

Price: $1,200.00 – IN STOCK

RUSS ANDREWS BACK UP

Blade Length: 5″

Overall Length: 9.5″

Blade Steel: Elmax with a full double edge

Blade Finish: Satin

Handle Material: Grooved Brown Micarta

Sheath: Custom made leather sheath

Comments: Full tapered tang, red liners, only 5 Back Ups have been made and this is the only one ever made with Elmax. Excellent balance and handle ergonomics.

SOLD