Category

BOB HAJOVSKY SUB-HILT FIGHTER

Blade Length: 8″

Overall Length: 13″

Blade Steel: CPM 154

Blade Finish: Mirror

Guard and Sub-hilt Material: 416 Stainless Steel

Handle Material: Sambar Stag with file worked stainless steel liners

Sheath: Custom made leather sheath by maker

Comments: Bob was one of my favorite makers in the 1990’s. He only made two of these sub-hilts in Stag. The knife features a double hollow ground and double edge blade.

Unfortunately, Bob passed away in the 90’s. As such, it is very difficult to find his knives, especially a rare one in mint condition!

SOLD

GREG LIGHTFOOT 458 MAGNUM

Blade Length: 3.5″

Overall Length: 7.75″

Closed Length: 4.25″

Blade Steel: S30V

Blade Finish: Satin

Bolster: Titanium

Frame: Titanium

Scale Material: Carbon Fiber

Opener: Ambidextrous Thumb studs

Lock: Liner

Clip: Tip Down Carry

Comments: Serrated thumb ramp. double hollow ground Tanto style blade.

SOLD

BOB TERZUOLA TITANIUM EAGLE ROCK

Blade Length: 4.18″

Overall Length: 9.25″

Closed Length: 5.18″

Blade Steel: CPM 154

Blade Finish: Satin

Bolster Material: Titanium

Bolster Finish: Anodized Bronze

Frame Material: Titanium

Frame finish: Tumble

Handle Material: Desert Ironwood

Opener: Ambidextrous Thumb Wheel

Lock: Liner

Clip: Tip Up Carry, Anodized Bronze

Comments: Features a fuller and serrated thumb ramp

SOLD

KEN STEIGERWALT CUSTOM HUNTING KNIFE

Blade Length: 5 1/8″

Overall Length: 8.5″

Blade Steel: 440C

Blade Finish: Mirror

Blade Style: Drop Point

Guard Material: 416 stainless steel

Handle Material: Desert Ironwood

Sheath: Custom made leather sheath by Tim Steingass

Comments: Today, Ken is best known for his stylish and expensive folders! His fixed blades are difficult to come by. Ken’s exceptional craftsmanship is evident even in this earlier knife. Ken’s version of the classic Loveless style hunting knife!

SOLD

RON GASTON CUSTOM MAPLE BOOT FIGHTER

Blade Length: 4″

Overall Length: 8.5″

Blade Steel: 154 CM

Blade Finish: Satin

Bolster Material: Stainless steel

Handle Material: Spalted Maple

Sheath: Custom made leather sheath by Tim Steingass

Comments: Excellent lines, full tapered tang, single edge. A timeless classic!

SOLD

BUSTER WARENSKI CUSTOM SKINNING KNIFE

Blade Length: 4.5″

Overall Length: 9″

Blade Steel: ATS-34

Blade Finish: Mirror

Blade Style: Skinner

Guard Material and Pommel: 416 stainless steel

Handle Material: Cocobolo with stainless steel and black micarta spacers.

Sheath: No Sheath, comes with a zip up case.

Comments: Buster is considered by most (to include myself) to be the finest custom fixed blade knife maker of the 20th Century. His knives have sold for in excess of $250,000.00. This example of his work will provide you a knife from this legendary maker at a more than fair price.

SOLD

JIM SISKA DAMASCUS AND STAG CUSTOM BOOT FIGHTER

Blade Length: 4.75″

Overall Length: 9.5″

Blade Steel: Twist Pattern Stainless Steel Damascus

Guard and Pommel: File-worked 416 Stainless Steel guard. Pommel is file-worked to match stag.

Handle Material: Sambar Stag

Sheath: Custom made leather sheath by maker.

Comments: The crisp and clean lines of this knife are sure to please the most discriminating custom knife buyer.

SOLD

RON GASTON CUSTOM FIGHTER

Blade Length: 5.25″

Overall Length: 10″

Blade Steel: 154 CM

Blade Finish: Satin

Bolster Material: Stainless steel

Handle Material: Desert Ironwood

Sheath: Custom made leather sheath by maker

Comments: Excellent lines, full tapered tang, double edge. A timeless classic!

SOLD

ROD CHAPPEL BOWEMAN KNIFE

Blade Length: 5″

Overall Length: 10.25″

Blade Steel: 440C

Blade Finish: Mirror

Handle Material: Maroon Micarta

Guard: Integral guard and sub-hilt

Sheath: Padded Case

Comments: Serrated Thumb Ramp, Full tapered tang with Brass and Red liners, thong hole, double edge, made June 4th 2002, Serial Number 001!

SOLD

RUFFIN JOHNSON #6 HUNTER

Blade Length: 4.15″

Overall Length: 9″

Blade Steel: 440C

Blade Finish: Mirror with file work on top of blade

Guard Material: Stainless steel guard and pommel with wolf’s head on pommel.

Handle Material: Mastodon Ivory and Lignum Vitae with stainless steel and black fiber spacers.

Sheath: This knife comes with a NEW custom made leather sheath by Kenny Rowe.

Comments: Ruffin’s knives were always a favorite among collectors for his artistic execution of classic hunters. Knife is previously owned, but in mint condition.

SOLD

JODY MULLER DAMASCUS DIRK

Blade Length: 3″

Overall Length: 6″

Blade Steel: Twisted Ladder Pattern Damascus.

Handle Material: Mastodon Ivory

Sheath: Custom made leather sheath with boot or belt clip by Kenny Rowe.

Comments: Knife features carving on the blade. Marked: “Muller Forge”

SOLD

PHIL ROSE PSK-2

Blade Length: 4″

Overall Length: 9.5″

Blade Steel: Bohler N690

Blade Finish: Bead Blast

Handle Material: Textured and Bead blasted, maroon Micarta.

Sheath: Kydex with attached fire starter and whistle. (attaches with Tek-Lok)

Comments: Would make and excellent bush craft or field knife. Serrated thumb ramp.

SOLD

BOB DOZIER KS-3 PROFESSIONAL GUIDE’S KNIFE

Blade Length: 4.25″

Overall Length: 9.5″

Blade Steel: D-2

Blade Finish: Belt Satin

Guard: Integral single guard

Handle Material: Black Micarta

Sheath: Custom made Kydex sheath by maker.

Comments: Built with 3/16th” stock, Arkansas Dozier blade. Bob currently has a three-year backlog for his knives. Brass tube-lined thong hole.

SOLD

BOB DOZIER KM-12 BOWIE

Blade Length: 7.5″

Overall Length: 8″

Blade Steel: D-2

Blade Finish: Belt Satin

Guard: Integral single guard

Handle Material: Desert Ironwood

Sheath: Custom made Kydex sheath by maker

Comments: Built with ¼” stock, Arkansas Dozier blade. Bob currently has a three-year backlog for his knives. Brass tube-lined thong hole.

SOLD

TERRY VANDEVENTER HUNTER/UTILITY

Blade Length: 5.75″

Overall Length: 10.75″

Blade Steel: W-2

Guard: Stainless steel guard and spacer, silicon bronze file worked liners and pins.

Handle Material: Desert Ironwood

Sheath: Custom made leather sheath by maker.

Comments: Great lightweight well-balanced hunter. Terry is one of the premier Master Smiths in the ABS. Currently, he is not accepting orders.

SOLD

JASON CLARK BF-1

Blade Length: 3.75″

Overall Length: 8.5″

Closed Length: 4.75″

Blade Steel: S35VN

Blade Finish: Satin

Bolster: Ladder Pattern Damascus

Scale Material: Silver Lightning Strike Carbon Fiber

Opener: Flipper

Frame: Titanium

Finish: Bead blast

Lock: Frame

Clip: Tip up carry

Comments: Great fit and finish, super smooth opener!

Photo by Chuck Ward.

SOLD

DOC SHIFFER RECON

Blade Length: 3.5″

Overall Length: 8.5″

Closed Length: 4.5″

Blade Steel: 1095 with Hamon

Blade Finish: Dark Stonewash

Frame Finish: Anodized Bronze

Scale Material: Anodized Bronze Titanium

Opener: Flipper

Lock: Frame

Clip: Tip-up carry

Comments: Thumb serrations, file worked back spacer, feels solid in the hand.

SOLD

JOHN W. SMITH LDC-105 PROTOTYPE

Blade Length: 3.25″

Overall Length: 7″

Closed Length: 4″

Blade steel: ATS-34

Blade finish: Satin

Bolster: Titanium

Frame material: Titanium

Handle Material: Black G-10

Opener: Ambidextrous Thumb Wheel

Lock: Liner

Clip: Tip Down

Comments: Serrated thumb ramp

SOLD

JOHN W. SMITH LDC-5 PROTOTYPE

Blade Length: 4″

Overall Length: 9.5″

Closed Length: 5.5″

Blade steel: ATS-34

Blade finish: Satin

Bolster: Titanium

Frame material: Titanium

Handle Material: Black G-10

Opener: Ambidextrous Thumb Wheel

Lock: Liner

Clip: Tip Down

SOLD

MIKE RUTH SR. VAQUERO

Blade Length: 6.5″

Overall Length: 11.25″

Blade Steel: Falling Ladder Pattern Damascus

Blade Finish: Acid Etched

Guard Material: Stainless steel guard, grooved spacer and file worked pommel.

Handle Material: Stag

Sheath: Custom made leather sheath with Croc inlay by Kenny Rowe

Comments: Mike is an ABS Journeyman Smith!

SOLD

TRACE RINALDI TTKK

Blade Length: 4.25″

Overall Length: 9″

Blade Steel: S30V

Blade Finish: Black Powder Coating

Guard: Integral single guard

Handle Material: Black Micarta

Sheath: Custom Made Kydex sheath

Comments: Trace’s knives are extremely hard to come by. Thumb serrations along the top, single edge, full tang and multiple lanyard holes.

SOLD

SCOTT COOK LOCHSA

Blade Length: 3.625″

Overall Length:8.25″

Closed Length: 4.58″

Blade Steel: S30V

Blade Finish: Satin

Frame Finish: Contoured, Bead blast on flats and satin finish on contours

Frame Material: Titanium

Opener: Thumb Stud

Lock: Frame

Clip: Tip up carry

Comments: Brand new from Scott in 2003. Never carried, used or sharpened. Comes with original box and information card.

SOLD

TIM STEINGASS AK UTILITY

Blade Length: 4.5″

Overall Length: 8.75″

Blade Steel: D2

Blade Finish: Satin

Guard Material: Stainless Steel

Handle Material: Black Micarta

Sheath: Custom made leather sheath by maker.

Comments: Full tang, thumb serrations on top of blade, Stainless Steel tube-lined thong holes, and contoured handle for great ergonomics. Designed to decrease hand fatigue with extended use as a Hard Use Field knife.

Exclusively through Robertson’s Custom Cutlery.

SOLD

GREG LIGHTFOOT MINI PIT BOSS NECK

Blade Length: 3.”

Overall Length: 6.5″

Blade Steel: A-2

Blade Finish: Black Coated

Handle Material: Textured Black G-10

Sheath: Kydex sheath with Tek-Lok to be worn on belt or around your neck

Comments: Previously owned, slight mark on blade where Kydex sheath rubbed off coating.

SOLD

BOB TERZUOLA / MICROTECH ATCF D/A #0009

Blade Length: 3 7/8″

Overall Length: 8.75″

Blade Steel: 154-CM

Blade Finish: Satin

Bolster: Titanium with bead blast finish

Handle Material: Ivory Micarta

Opener: Ambidextrous thumb wheel and bolster release

Lock: Liner

Clip: Tip-up carry

Comments: This knife features the hand ground “Dagger” logo, Serial #0009 04/2004. Comes with Microtech nylon pouch and Terzuola info card and plastic pouch. New in box with operations and owners manual.

SOLD

SCHUYLER LOVESTRAND IVORY F-1 SUB-HILT

Blade Length: 7.25″

Overall Length: 12.25″

Blade Steel: 154CM

Blade Finish: Mirror

Guard & Sub-Hilt Material: Stainless Steel

Handle Material: Mammoth Ivory Bark

Sheath: Custom made leather sheath

Comments: Full tapered tang, sharpened top edge, red micarta liners

Schuyler is one of the best fixed blade makers in the world!

SOLD

CRUSADER FORGER (TRIDENT KNIVES) VIS METRO

Blade Length: 3.5″

Overall Length: 8.5″

Closed Length: 5″

Blade Steel: S30V

Blade Finish: Black and gray Tiger stripe pattern

Frame: Grooved all titanium with black and gray Tiger stripe pattern

Opener: Thumb hole or Flipper

Lock: Frame

Clip: Tip up carry

Comments: Extremely overbuilt folder. Some minor handling marks.

SOLD

JIMMY LILE ORIGINAL SLY II

Blade Length: 9″

Overall Length: 14″

Blade Steel: D-2

Blade Finish: Two-Tone Satin and Mirror

Guard Material: Bead blasted 416 Stainless Steel

Handle Material: Stainless steel tube, Aluminum butt cap (with compass inserted), cord wrapped handle

Sheath: Original Johnson Sheathery custom made leather sheath.

Comments: This is an original Lile Sly II, not one of the copies that is currently being sold by another maker.

SOLD

VAUGHN NEELEY DA DAGGER

Blade Length: 8″

Overall Length: 13″

Blade Steel: 440C

Blade Finish: Mir

Guard and Pommel Material: Stainless steel

Handle Material: Black Micarta

Sheath: Custom made leather sheath

Comments: Full double edge, ¼” stock, serial number 002

SOLD

MICK STRIDER CUSTOM SNG

Blade Length: 3.5″ Nightmare grind

Closed Length: 4.75″

Overall Length: 8.5″

Blade Steel: S30V

Handle Material: OD Green G-10

Frame Material: Titanium

Opener: Ambidextrous thumb hole and thumb studs.

Lock: Frame

Clip: Tip-Up

Comments: Flame style finish on the frame, and Ti pocket clip. Crosshatch grid finish on the blade. Hinderer stabilizer on the frame, lanyard with Starlinger Strider bead. Previously owned in excellent condition. Comes with a custom black leather sheath.

SOLD

DUANE DWYER (DDC) CUSTOM SNG

Blade Length: 4″ Chisel ground blade

Closed Length: 4.75″

Overall Length: 9.1″

Blade Steel: D2

Handle Material: Fluted Black G-10

Bolster Material: Fluted Titanium

Frame Material: Titanium

Opener: Ambidextrous thumb studs.

Lock: Frame

Clip: Tip-UP

Comments: Flame style back spacer, pocket clip and bolsters Serrated thumb ramp. Concertina wire design coated blade. Previously owned in excellent condition.

SOLD

DUANE DWYER (DDC) CUSTOM SNG

Blade Length: 3.5″ Chisel ground blade

Closed Length: 4.75″

Overall Length: 8.5″

Blade Steel: D2

Handle Material: Brown G-10

Frame Material: Titanium

Opener: Ambidextrous thumb hole and thumb studs.

Lock: Frame

Clip: Tip-UP

Comments: Serrated thumb ramp, two-tone finish on blade and Ti frame. Satin finish concertina outline and bead blast finish. Comes with a custom Greg Everett golden brown leather sheath. Previously owned in excellent condition.

SOLD

TRACE RINALDI LEO

Blade Length: 4.25″

Overall Length: 10″

Blade Steel: S30V

Blade Finish: Bead blast

Guard: Integral single guard

Handle Material: Black Micarta

Sheath: Custom Made Kydex sheath

Comments: Trace’s knives are extremely hard to come by. Thumb serrations along the top part of the clip, the bead blasting has been removed from taking the knife in and out of the sheath Trace’s shop in. Single Edge, Full tang and multiple lanyard holes.

SOLD

GREG LIGHTFOOT PIT BOSS

Blade Length: 3.5″

Overall Length: 8.75″

Closed Length: 4.5″

Blade Steel: CPM-154

Blade Finish: Satin

Frame Material: Titanium

Handle Material: Lightning Strike Carbon Fiber and Desert Ironwood

Opener: Flipper

Lock: Liner

Clip: Tip-up carry

Comments: Carved flipper opener, Carbon Fiber clip

SOLD

GAVCO FRAMELOCK FLIPPER

Blade Length: 3.75″

Overall Length: 8.5″

Closed Length: 4.75″

Blade Steel: AEB-L

Blade Finish: Tumble finish with copper wash

Frame Material: Titanium

Handle Material: M3 Composite

Opener: Flipper

Lock: Frame

Clip: Tip-up carry

Comments: Carved flipper opener and Carbon Fiber clip.

SOLD

JIM SISKA DAMASCUS M16 SUB-HILT

Blade Length: 8.5″

Overall Length: 13.5″

Blade Steel: Jerry Rados Twist Pattern Stainless Steel Damascus

Blade Finish: Satin

Guard Material: 416 Stainless Steel, anodized a silver/blue color. Very striking!

Handle Material: Stag

Sheath: Custom made leather sheath

Comments: The crisp and clean lines of this knife are sure to please the most discriminating custom knife buyer.

SOLD

JEFF HARKINS TRITON OTF

Blade Length: 3.75″

Overall Length: 8.6″

Blade Steel: ATS-34

Handle Material: Titanium Frame with two tone finish and African Blackwood overlays.

Opener: Button activates and retracts the blade

Clip: No Clip

Comments: Jeff was the first custom maker to successfully build the first OTF (Out The Front) that retractable blade.

SOLD

VAUGHN NEELEY USN YORI TOSHI TANTO

Blade Length: 5-3/8″

Overall Length: 13.5″

Blade Steel: 440C

Blade Finish: Two tone Mirror on the hollows and bead blasted on the flat.

Guard and Pommel: Stainless Steel

Handle Material: Black Micarta

Sheath: Custom Made leather sheath

Comments: Serial Number 5 of 20.

SOLD

PHANTHOM STEELWORKS CHRIS MARTIN

Blade Length: 3.75″

Overall Length: 9.5″

Closed Length: 5.5″

Blade Steel: S35VN

Blade Finish: Mechanical Glacier Finish

Frame: Machined and Anodized Bronze color Titanium

Opener: Flipper

Lock: Frame

Clip: Tip-up carry, Machined and Anodized Bronze to match the frame.

SOLD

WALTER BREND SYKES FAIRBAIRN DAGGER SH

Blade Length: 7.25″

Overall Length: 12.25″

Blade Steel: CPM-154

Blade Finish: Mirror

Guard Material: Stainless Steel

Handle Material: Sheep Horn

Sheath: Custom Made Black Leather

Comments: Full tang, double edge, thong hole, skull crusher, Etowah, TN logo

SOLD

VAUGHN NEELEY SG FIGHTER

Blade Length: 7.5″

Overall Length: 12.5″

Blade Steel: 440C

Blade Finish: Micro bead blast

Guard and Pommel: Stainless Steel

Handle Material: Black Micarta

Sheath: Custom Made leather sheath with sharpening stone inserted in the back of the sheath

Comments: Double Edge, Full hidden tang, contoured guard, and handle features two finger grooves.

SOLD

RJ MARTIN VANGUARD OCULUS

Blade Length: 4 1/8″

Overall Length: 9.5″

Closed Length: 5.5″

Blade steel: CTSXHP

Blade finish: Satin

Bolster: Zirconium

Frame material: Textured Titanium

Inlay: Lightning Strike Carbon Fiber

Opener: Flipper

Lock: Frame

Clip: Zirconium (tip up)

Comments: First folding dagger by R.J. Martin!

Full double edge (blade fits into handle)

Limited Edition of 50 knives.PROTOTYPE! Serial #00

Photo: SharpbyCoop

SOLD

RUSS ANDREWS BACK UP

Blade Length: 5″

Overall Length: 9.5″

Blade Steel: Elmax with a full double edge

Blade Finish: Satin

Handle Material: Grooved Brown Micarta

Sheath: Custom made leather sheath

Comments: Full tapered tang, red liners, only 5 Back Ups have been made and this is the only one ever made with Elmax. Excellent balance and handle ergonomics.

SOLD