Category

GREG LIGHTFOOT LDC-102 PROTO

Blade Length: 3.5″

Overall Length: 7.87″

Closed Length: 4.37″

Blade steel: ATS-34

Blade finish: Bead blast

Bolster: Titanium

Frame material: Titanium

Handle Material: Black G-10

Opener: Ambidextrous Thumb Wheel

Lock: Liner

Clip: Tip Down

Comments: Serrated thumb ramp.

Price: $500.00 – IN STOCK

WALTER BREND SYKES FAIRBAIRN DAGGER

Blade Length: 7.25″

Overall Length: 12.25″

Blade Steel: D-2

Blade Finish: Satin

Guard Material: Stainless Steel

Handle Material: Bead Blasted Jade Green Micarta

Sheath: Custom Made Black Leather

Comments: Full tang, double edge, thong hole, skull crusher, Etowah,TN logo

Price: $2,400.00 – IN STOCK

WALTER BREND 6″ MODEL 2 SC

Blade Length: 6″

Overall Length: 11.75″

Blade Steel: D-2

Blade Finish: Satin

Bolster/Guard Material: Stainless Steel

Handle Material: OD Green

Sheath: Kydex Lined Nylon

Comments: Walterboro, SC logo, great carry size for the field.

PRICE: $2,200.00 IN STOCK

RJ MARTIN WASABI 3.5

Blade Length: 3.5″

Overall Length: 7.5″

Blade Steel: Double Ground PD-1

Guard: Turks Head knot made from epoxy impregnated cord.

Handle Material: Same (ray skin) cover over the tang. With epoxy impregnated cord wrap and Sterling Silver Tiger Menuki.

Sheath: Custom made Kydex and Kangaroo leather sheath with Tek-Lok by maker

Comments: According to RJ, “PD-1 is the newest, best steel for this type of knife and is made in America.” I have had numerous requests for this knife since RJ stopped making them 10 years ago. He has agreed to do a limited run of these exclusively for Robertson’s Custom Cutlery.

Price: $850.00 – IN STOCK

JIM SISKA DAMASCUS BIRD AND TROUT

Blade Length: 3.25″

Overall Length: 7.75″

Blade Steel: Twist Pattern Damascus

Blade Finish: Acid Etched

Handle Material: Desert Ironwood

Sheath: Custom made leather sheath by maker

Comments: Full Twist Pattern Damascus Tang. The crisp and clean lines of this knife are sure to please the most discriminating custom knife buyer.

Price: $425.00 – IN STOCK

FERRUM FORGE KNIFE WORKS PHANTOM FOLDER

Blade Length: 3.5″

Overall Length: 7.5″

Closed Length: 4.375″

Blade Steel: S125V

Steel Finish: Dark Etch Stonewash Finish

Frame Material: Titanium, Dark Etch Stonewash Finish with anodized blue Phantom jet holes on handle.

Opener: Flipper

Lock: Frame

Clip: Tip-up

Comments: Serial Number 16. This is a discontinued model.

Price: $700.00 – IN STOCK

JOHN FITCH STAG HUNTER

Blade Length: 4.25″

Overall Length: 9.5″

Blade Steel: 1084

Blade Finish: Satin

Guard Material: Stainless steel with with file work on top of guard.

Handle Material: Sambar Stag

Sheath: No sheath, comes with a zip up case

Comments: John is a Master Smith, this knife has his Journeyman Smith mark. Would make a great hunter and all-around camp knife!

Price: $450.00 – IN STOCK

BOB TERZUOLA VANGUARD ENTRY TEAM TOOL

Blade Length: 5 7/8″

Overall Length: 10 7/8″

Blade Steel: ATS-34

Blade Finish: Bead blast

Guard: Integral double guard

Handle Material: Black Micarta

Sheath: Kydex sheath

Comments: Thumb serrations, full tang with glass breaker at the end of the handle, serrations, serial number 16, made exclusively for Robertson’s Custom Cutlery.

Price: $900.00 – IN STOCK

GORDON GRAHAM DAMASCUS BW HUNTER

Blade Length: 4.25″

Overall Length: 8.5″

Blade Steel: Ladder Pattern Damascus

Guard: Stainless steel guard and spacer, black Micarta and Bronze spacers

Handle Material: Burl Walnut

Sheath: Custom made leather sheath by Kenny Rowe

Comments: Great lightweight well-balanced hunter. Gordon is an ABS Journeyman Smith.

Price: $450.00 – IN STOCK

GORDON GRAHAM DAMASCUS CC HUNTER

Blade Length: 5″

Overall Length: 9.75″

Blade Steel: Swirl Eye Pattern Damascus

Guard: Stainless steel guard and spacer, black Micarta and Bronze spacers

Handle Material: Curly Cherry

Sheath: Custom made leather sheath by Kenny Rowe

Comments: Great lightweight well-balanced hunter. Gordon is an ABS Journeyman Smith.

Price: $475.00 – IN STOCK

SCOTT GALLAGHER KOA HUNTER

Blade Length: 4.75″

Overall Length: 9.25″

Blade Steel: 80CRV2 High Carbon Steel with hand-rubbed satin finish

Guard: Stainless steel guard and spacer

Handle Material: Curly Koa

Sheath: Custom made leather sheath by Kenny Rowe

Comments: Great lightweight, well-balanced hunter. Scott is an ABS Journeyman Smith.

Price: $425.00 – IN STOCK

SCOTT GALLAGHER MAPLE BURL SKINNER

Blade Length: 4.75″

Overall Length: 9.25″

Blade Steel: 80CRV2 High Carbon Steel with hand-rubbed satin finish

Guard: Stainless steel guard and spacer

Handle Material: Maple Burl

Sheath: Custom made leather sheath by Kenny Rowe

Comments: Great lightweight well-balanced skinner. Scott is an ABS Journeyman Smith.

Price: $450.00 – IN STOCK

SPENCER ALAN REITER PACK AND BOAT

Blade Length: 3.25″

Overall Length: 7 3/8″

Blade Steel: CPM D2

Blade Finish: Satin

Handle Material: Orange G-10 with black cord overwrap

Sheath: This knife comes with custom made Kydex neck sheath.

Comments: One of only Two in this configuration. Very well thought out knife; exactly what you would expect from a former Infantryman. Serrated thumb ramp, left side is tapered in the back, combination prybar, and nail remover.

Price: $200.00 – IN STOCK

LARRY CHEW MDF

Blade Length: 3.75″

Overall Length: 8.25″

Closed Length: 4.5″

Blade Steel: S35VN

Blade Finish: Satin

Frame Material: Titanium

Handle Material: Titanium

Handle Finish: Combination satin and bead blast. Cut outs are bead blasted.

Opener: Ambidextrous Flipper

Lock: Frame

Clip: Tip up carry

Comments: Serrated thumb ramp, with the “Voodoo” pivot Larry made Famous!

Price: $490.00 – IN STOCK

PETER PARKINSON FAIRBAIRN/SYKES X DAGGER

Blade Length: 6 7/8″

Overall Length: 12″

Blade Steel: 440C

Blade Finish: Mirror

Handle and Guard Material: Stainless steel with black coating.

Sheath: Custom made leather sheath. Featuring attachment tabs, belt loop and stainless-steel tip.

Comments: Full double edge, this knife is an excellent replica of the Second Pattern Fairbairn/Sykes Dagger made famous by both British and US Commando groups during WWII.

Knife maker Brent Sandow grinds the blades for these Parkinson knives.

Price: $675.00 – IN STOCK

JOHN TILTON STAG HUNTER

Blade Length: 3 7/8″

Overall Length: 5″

Blade Steel: 1084

Guard and Pommel: Bronze

Handle Material: Sambar Stag

Sheath: Custom made leather sheath by maker

Comments: Beautiful knife, but built to be used. Excellent handle ergonomics!

Price: $450.00 – IN STOCK

HENRY TORRES ELK FIGHTER

Blade Length: 6.25″

Overall Length: 10.5″

Blade Steel: 1084

Guard: Stainless Steel with file worked stainless steel spacer and black Micarta spacer.

Pommel: Stainless steel

Handle Material: Elk Antler

Sheath: Custom made leather sheath by maker

Comments: Beautiful knife, but built to be used. Henry is an Award-Winning ABS Master Smith! This knife was made when Henry was an Apprentice Smith

Price: $400.00 – IN STOCK

WALTER BREND STAG DAGGER

Blade Length: 8″

Overall Length: 13.5″

Blade Steel: 440C

Blade Finish: Mirror

Guard Material: Stainless steel

Handle Material: Sambar Stag

Sheath: Custom made leather sheath by Johnson Sheathery!

Comments: Serial number 10-81. Walter built his first knife in December 1980. In 1981 he numbered his knives with the year. This knife was the 10th knife he made in 1981 and the 11th knife he ever made. The knife features some accent engraving by Fred Harrington.

Price: $3,200.00 – IN STOCK

RJ MARTIN KWAIKEN

Blade Length: 4″ Chisel Ground

Overall Length: 8.25″

Blade Steel: S30V

Blade Finish: Satin

Handle Material: Black Same (Ray Skin) with a epoxy impregnated 550 cord over a Sterling silver Dragon Menuki.

Sheath: Unique custom made Carbon Fiber wrapped Mahogany with rare earth magnets. Comes with a black pocket clip.

Comments: Features a Turks Head knot for a guard and two more on the sheath.

Price: $800.00 – IN STOCK

TOMMY GANN HUNTER

Blade Length: 4.25″

Overall Length: 8.75″

Blade Steel: 1084

Guard: Stainless steel with Bronze spacer

Handle Material: Maple

Sheath: Custom made leather sheath by Jack Mosher.

Comments: Great lightweight well-balanced hunter. Tommy is an ABS Master smith, this knife was made when he was a Journeyman smith.

Price: $425.00 – IN STOCK

MIKE OLIVE FIGHTER

Blade Length: 6.75″

Overall Length: 12.25″

Blade Steel: 1084

Blade Finish: Satin

Guard Material: Stainless steel

Handle Material: Desert Ironwood

Sheath: Custom made leather sheath

Comments: Great handle and ergonomics. Mike is an ABS Journeyman Smith.

Price: $550.00 – IN STOCK

MIKKEL WILLUMSEN URBAN TACTICAL FRAME LOCK FOLDER

Blade Length: 3.5″

Overall Length: 8″

Closed Length: 4.5″

Blade Steel: CPM-154

Blade Finish: Two-tone Satin and Stonewash

Handle Material: Black and yellow G-10

Frame Material: Bead-blasted Titanium

Lock: Frame

Opener: Ambidextrous thumb groove

Clip: Tip-down with bead blast finish

Comments: Smooth opening and excellent lock up. Features IKBS!

Price: $350.00 – IN STOCK

BILL LUCKETT TAC II 40th ANNIVERSARY DAGGER

Blade Length: 6″

Overall Length: 10.75″

Blade Steel: CPM 154

Blade Finish: Bead blast

Guard Material: Stainless Steel

Handle Material: Black Micarta

Sheath: Kydex Lined Cordua Nylon

Comments: Limited Edition 40th Anniversary. Concave grind on back side of blade, thong holes on guard and handle.

Price: $850.00 – IN STOCK

JIM SISKA M16 SUB-HILT DI FIGHTER

Blade Length: 8.75″

Overall Length: 13.75″

Blade Steel: CPM 154

Blade Finish: Satin

Guard Material: 416 Stainless Steel

Handle Material: Desert Ironwood

Sheath: Custom made leather sheath

Comments: The crisp and clean lines of this knife are sure to please the most discriminating custom knife buyer.

Price: $1,250.00 – IN STOCK

TODD BEGG PESSIMIST PROTOTYPE FIGHTER

Blade Length: 8″

Overall Length: 13″

Blade Steel: N690 Bohler

Blade Finish: Sniper Gray Cerakote

Guard: Integral double guard

Handle Material: Textured and contoured black Micarta

Sheath: Kydex sheath with Tek-Lok and a Kydex sheath set up with nylon to be worn as a shoulder rig.

Comments: There were two sets of these prototypes made; an A and B set. Each set had one 6″, 7″ and 8″ version and all the blades were ground the same.

This one is marked PROTOTYPE B. It is the largest knife in the B series. Only two sets of the custom versions were made!

Price: $1,250.00 – IN STOCK

JIM SISKA COCOBOLO M16 FIGHTER II

Blade Length: 7.25″

Overall Length: 12.25″

Blade Steel: CPM 154

Blade Finish: Satin

Guard Material: 416 Stainless Steel

Handle Material: Cocobolo Wood

Sheath: Custom made leather sheath

Comments: The crisp and clean lines of this knife are sure to please the most discriminating custom knife buyer.

Price: $900.00 – IN STOCK

JIM SISKA FORGED HUNTER

Blade Length: 2.25″

Overall Length: 6.75″

Blade Steel: 1084

Blade Finish: Satin

Handle Material: Desert Ironwood

Sheath: Custom made leather sheath by maker

Comments: Serrated thumb ramp. This is one of Jim’s limited blades that he has forged. (The logo is marked accordingly.) The crisp and clean lines of this knife are sure to please the most discriminating custom knife buyer.

Price: $350.00 – IN STOCK

JIM SISKA M16 COCOBOLO FIGHTER I

Blade Length: 8.5″

Overall Length: 13.5″

Blade Steel: CPM 154

Blade Finish: Satin

Guard Material: 416 Stainless Steel

Handle Material: Cocobolo

Sheath: Custom made leather sheath

Comments: The crisp and clean lines of this knife are sure to please the most discriminating custom knife buyer.

Price: $975.00 – IN STOCK

JIM MINNICK LDC-104 PROTOTYPE

Blade Length: 3.25″

Overall Length: 7.5″

Closed Length: 4.5″

Blade steel: ATS-34

Blade finish: Satin

Bolster: Titanium

Frame material: Titanium

Handle Material: Black G-10

Opener: Ambidextrous Thumb Wheel

Lock: Liner

Clip: Tip Down

Comments: This is the very first tactical folder ever made by Jim.

Price: $500.00 – IN STOCK

BOB TERZUOLA M30 BATTLE GUARD

Blade Length: 6″

Overall Length: 10.75″

Blade Steel: ATS-34

Handle Material: Black Micarta

Sheath: Custom Made Kydex sheath

Comments: Bob Terzuola’s classic design!

Price: $975.00 – IN STOCK

WILLEM STEENKAMP CHUTE

Blade Length: 4.25″

Overall Length: 9″

Blade Steel: N690

Blade Finish: Mirror

Guard Material: Stainless steel

Handle Material: Cocobolo

Sheath: Custom Made Leather Sheath

Comments: Double Edge, Full tapered tang with red tang liners, thong hole

Price: $450.00 – IN STOCK

TIM STEINGASS SILENT KOA FIGHTER

Blade Length: 7″

Overall Length: 12″

Blade Steel: CPM-164

Blade Finish: Mirror

Handle Material: Presentation Koa

Sheath: Custom made leather sheath

Comments: Full tapered tang, red liners, thong hole and sharpened clip

Price: $590.00 – IN STOCK

LES GEORGE DAMASCUS ESR

Blade Length: 2.625″

Overall Length: 6.625″

Closed Length: 4.78″

Blade Steel: Chad Nichols SS Damascus with w/XHP Core

Frame Material: Titanium

Handle Material: Titanium with grenade CNC image into the scale

Opener: Flipper

Lock: Frame

Clip: Tip up

Comments: According to Les this is a one of a kind! Features a lanyard with a Starlinger bead.

Price: $1,200.00 – IN STOCK

LARRY CHEW TI SLAYER CF

Blade Length: 4″

Overall Length: 9″

Closed Length: 5″

Blade Steel: S35VN

Blade Finish: Satin

Bolster Material: Zirconium

Frame Material: Titanium

Handle Material: Silver Lightning Strike Carbon Fiber

Opener: Flipper with Voodoo bearing system

Lock: Liner

Clip: Titanium Tip Up Carry

Price: $725.00 – IN STOCK

JOHN YOUNG MASTODON DAGGER

Blade Length: 5 1/8″

Overall Length: 9 3/8″

Blade Steel: ATS-34

Blade Finish: Mirror

Guard Material: Stainless steel

Handle Material: Mastodon Ivory

Sheath: Custom made leather sheath by the maker.

Comments: Double edge, full tapered tang, thong hole, red liners

Price: $2,600.00 – IN STOCK

JOHN YOUNG STAG DAGGER

Blade Length: 5 1/8″

Overall Length: 9 3/8″

Blade Steel: ATS-34

Blade Finish: Mirror

Guard Material: Stainless steel

Handle Material: Sambar Stag

Sheath: Custom made leather sheath by the maker.

Comments: Double edge, full tapered tang, thong hole, red liners

Price: $2,400.00 – IN STOCK

TIM HANCOCK FRAME HANDLED ARIZONA TOOTHPICK

Blade Length: 12″

Blade Steel: 3 Bar Composite Damascus

Overall Length: 17″

Frame Handle Configuration: Silver guard, Damascus frame with file worked silver liners, Damascus spacer and Desert Ironwood handle. and frame, Damascus grooved Damascus spacer, Silver pineal, Desert Ironwood scales

Sheath: Custom made leather sheath with Shark inlay by maker

Comments: This is the only 3 Bar Damascus Dagger Tim ever made. This is featured in his book the Western Bladesmith. This knife has a frame handle which is why it look like it has a full tang. Tim is an ABS Master Smith and is now retired.

Price: $6,500.00 – IN STOCK

BRIAN NADEAU 2D CYCLONE SG

Blade Length: 3.5″

Overall Length: 8.25″

Blade material: CPM S35VN

Blade Finish: Satin

Pivot: Stainless ball thrust bearing

Frame: Textured Titanium 6al-4v frame with ceramic bead blast finish.

Lock: Frame

Opener: Flipper

Pocket Clip: Tip Up 410 SS

Comments: Great EDC, serrated thumb ramp. This is one of the last Cyclones to be made!

Price: $925.00 – IN STOCK

TIM STEINGASS INCURSION FIGHTER

Blade Length: 10″

Overall Length: 15.25″

Blade Steel: CPM-154

Guard and Pommel: Stainless steel with Copper ferrule

Handle Material: Desert Ironwood

Sheath: Custom made leather sheath by maker

Comment: Exclusively through Robertson’s Custom Cutlery

Price: $950.00 – IN STOCK

JOSH FISHER DESERT IRONWOOD BOWIE 2

Blade Length: 10″

Overall Length: 15″

Blade Steel: 1084

Blade Finish: Satin

Guard Material: Stainless steel

Handle Material: Desert Ironwood

Sheath: Custom made leather sheath

Comments: Excellent finish and balance! Josh is an ABS Journeyman Smith.

Price: $750.00 – IN STOCK

PETER BAUCHOP CHOPPER

Blade Length: 8″

Overall Length: 13″

Blade Steel: D-2

Blade Finish: Satin

Guard Material: Brass

Handle Material: Grooved black Micarta

Sheath: Kydex

Comments: Peter’s knives are some of the most collectible tactical fixed blades in the World. Serial number 20. Double Edge. One slight blemish on the flat on the name side.

Price: $1,000.00 – IN STOCK

DENNIS FRIEDLY MACASSAR EBONY FIGHTER

Blade Length: 8″

Overall Length: 13″

Blade Steel: CPM-154

Blade Finish: Satin

Guard Material: Stainless steel

Handle Material: Macassar Ebony

Sheath: No Sheath, comes with zip up padded pouch

Comments: Stainless steel pommel, thong hole

Price: $1,400.00 – IN STOCK

PHILL HARTSFIELD KOZUKA COPPER

Blade Length: 2.75″

Overall Length: 6.25″

Blade Steel: A-2, double ground

Blade Finish: Satin

Handle Material: Copper Habaki with epoxy coated tan cord wrap

Sheath: Textured leather custom sheath with neck cord.

Comments: Great EDC fixed blade with several carry options.

Price: $450.00 – IN STOCK

ORDER NOW

DAN DAGGAT DAGGER

Blade Length: 4.75″

Overall Length: 9.5″

Blade Steel: 440C

Blade Finish: Mirror

Guard Material: Stainless steel

Handle Material: Cocobolo

Sheath: Custom made leather sheath by maker

Comments: Sleek, stylish, full double edge. Full tapered tang provides excellent balance making this knife very quick in the hand.

Price: $400.00 – IN STOCK

JIM CROWELL HUNTER

Blade Length: 5.5″

Overall Length: 10.25″

Blade Steel: 1084

Guard: Nickel Silver

Handle Material: Maple

Sheath: Custom made leather sheath by maker.

Comments: Great lightweight well-balanced hunter. Jim is one of the premier Master Smiths in the ABS. Currently, he is not accepting orders.

Price: $575.00 – IN STOCK

BRION TOMBERLIN BLACK RAPIDS FIGHTER

Blade Length: 5.5″

Overall Length: 10.5″

Blade Steel: W-2 with Hamon

Guard: Stainless Bronze

Handle Material: Buckeye Maple

Sheath: Custom made leather sheath by Kenny Rowe

Comments: Brion is an ABS Master Smith. This is a JS knife.

Price: $550.00 – IN STOCK

GTC 3FF (3 Finger Folder)

Blade Length: 3″

Overall Length: 7″

Closed Length: 4″

Blade Steel: CPM 154

Blade Finish: Ceramic Bead Balst

Frame: Machined Titanium

Opener: Flipper

Lock: Frame

Clip: Tip up carry

Comments: Gustavo Cecchini (GTC) lives in Sao Jose Rio Preto, Brazil. This knife features Gus’s deep flush pocket clip.

Price: $1,400.00 – IN STOCK

JASON CLARK ZIRCONIUM SILVER LSCF DAGGER

Blade Length: 3.75″

Overall Length: 8.5″

Closed Length: 4.75″

Blade Steel: CPM-154

Blade Finish: Satin

Bolster: Zirconium

Frame: Titanium

Scale Material: Silver Lighting Strike Carbon Fiber

Opener: Flipper

Lock: Frame

Clip: Zirconium Tip up carry

Comments: Full double edge blade

PRICE: $825.00 IN STOCK

HENRY TORRES SH HUNTER

Blade Length: 4.5″

Overall Length: 8.75″

Blade Steel: 1084

Guard: Stainless Steel

Handle Material: Sheep Horn with Hamon

Sheath: Custom made leather sheath by maker

Comments: Great, lightweight, well-balanced hunter! Henry is an Award Winning ABS Master Smith!

Price: $475.00 – IN STOCK