Category

TONI OOSTENDORP ORBIS 7

Blade Length: 7″

Overall Length: 12″

Blade Steel: O-1

Blade Finish: Black Cera Kote

Guard Material: Stainless Steel

Handle Material: Contoured and grooved black Micarta

Sheath: Kydex with Maxpedition knife pouch

Comments: All Orbis knives are integral. The blade, guard and tang are all forged from one piece of O-1 steel. The pommel is glued and penned into position. Giving you the utmost confidence in the performance of this knife.

Price: $900.00 – NOT IN STOCK

CHARLIE EDMONDSON ELITE KNIVES POCKET CLEAVER

Blade Length: 2.5″

Overall Length: 5.25″

Blade Steel: 3/16” Stock, 1095 High Carbon Steel

Blade Finish: Black Phosphate

Handle Material: Grooved OD Green Micarta

Sheath: Custom made leather sheath by maker

Comments: Great little utility knife. Few faint marks on black finish from the sheath.

Price: $155.00 – IN STOCK

TIM STEINGASS SASQUATCH CUSTOM FIGHTER

Blade Length: 5.5″

Overall Length: 10.5″

Blade Steel: 3V

Blade Finish: Satin

Handle Material: Black Micarta

Sheath: Custom made leather sheath by maker.

Comments: Full tang, red liners, thong hole, and double edge.

Price: $450.00 – NOT IN STOCK

PHIL ROSE PSK-2

Blade Length: 4″

Overall Length: 9.5″

Blade Steel: Bohler N690

Blade Finish: Bead Blast

Handle Material: Textured and Bead blasted, maroon Micarta.

Sheath: Kydex with attached fire starter and whistle. (attaches with Tek-Lok)

Comments: Would make and excellent bush craft or field knife. Serrated thumb ramp.

SOLD

BOB TERZUOLA VANGUARD ENTRY TEAM TOOL

Blade Length: 5 7/8″

Overall Length: 10 7/8″

Blade Steel: ATS-34

Blade Finish: Bead blast

Guard: Integral double guard

Handle Material: Black Micarta

Sheath: Kydex sheath

Comments: Thumb serrations, full tang with glass breaker at the end of the handle, serrations, serial number 16, made exclusively for Robertson’s Custom Cutlery.

Price: $900.00 – IN STOCK

BOB DOZIER KS-3 PROFESSIONAL GUIDE’S KNIFE

Blade Length: 4.25″

Overall Length: 9.5″

Blade Steel: D-2

Blade Finish: Belt Satin

Guard: Integral single guard

Handle Material: Black Micarta

Sheath: Custom made Kydex sheath by maker.

Comments: Built with 3/16th” stock, Arkansas Dozier blade. Bob currently has a three-year backlog for his knives. Brass tube-lined thong hole.

SOLD

TIM STEINGASS SILENT FIGHTER

Blade Length: 7″

Overall Length: 12″

Blade Steel: 3V

Blade Finish: Satin

Handle Material: Black Micarta

Sheath: Custom made leather sheath

Comments: Full tapered tang, red liners, thong hole, sharpened clip

Price: $450.00 – NOT IN STOCK

SPENCER ALAN REITER PACK AND BOAT

Blade Length: 3.25″

Overall Length: 7 3/8″

Blade Steel: CPM D2

Blade Finish: Satin

Handle Material: Orange G-10 with black cord overwrap

Sheath: This knife comes with custom made Kydex neck sheath.

Comments: One of only Two in this configuration. Very well thought out knife; exactly what you would expect from a former Infantryman. Serrated thumb ramp, left side is tapered in the back, combination prybar, and nail remover.

Price: $200.00 – IN STOCK

TIM STEINGASS VANGUARD SSD DAGGER

Blade Length: 7.5″

Overall Length: 12.5″

Blade Steel: CPM-D2

Blade Finish: Black Cerakote

Guard and Pommel material: Stainless steel with Black Cerakote finish.

Handle Material: Black Micarta. Grooves gives the handle both improved grip and ergonomics!

Sheath: Custom made leather sheath by maker

Comments: Useful armor piercing tip, full hidden tang, serrated “thumb print” for indexing, Skull crusher.

Sold Exclusively through Robertson’s Custom Cutlery.

Photo: SharpByCoop

Price: $850.00 – NOT IN STOCK

TIM STEINGASS BASTION DAGGER

Blade Length: 7″

Overall Length: 12.5″

Blade Steel: CPM-D2

Blade Finish: Satin

Handle Material: Black Rubber. Gives the handle both comfort and improved grip and ergonomics!

Sheath: Custom made leather sheath by maker

Comments: Very cool and useful armor piercing tip, full tapered tang, thong holes on the face of the guard, handle and skull crusher

Sold Exclusively through Robertson’s Custom Cutlery.

Price: $650.00 – NOT IN STOCK

TIM STEINGASS BASTION DAGGER

Blade Length: 7″

Overall Length: 12.5″

Blade Steel: CPM-D2

Blade Finish: Satin

Handle Material: Black Rubber. Gives the handle both comfort and improved grip and ergonomics!

Sheath: Custom made leather sheath by maker

Comments: Very cool and useful armor piercing tip, full tapered tang, thong holes on the face of the guard, handle and skull crusher

Sold Exclusively through Robertson’s Custom Cutlery.

Price: $700.00 – NOT IN STOCK

TIM STEINGASS HARPOON

Blade Length: 4.25″

Overall Length: 9″

Blade Steel: 3-V

Blade Finish: Satin

Guard Material: Stainless Steel

Handle Material: Black Micarta

Sheath: TIE Industires Kydexs Sheath w/Tek Lok and thumb opening retention system.

Comments: Full tapered tang, thong hole, thumb serrations on top of blade.

Tim’s knives are an exceptional value for the money.

Price: $350.00 – NOT IN STOCK

PETER PARKINSON FAIRBAIRN/SYKES X DAGGER

Blade Length: 6 7/8″

Overall Length: 12″

Blade Steel: 440C

Blade Finish: Mirror

Handle and Guard Material: Stainless steel with black coating.

Sheath: Custom made leather sheath. Featuring attachment tabs, belt loop and stainless-steel tip.

Comments: Full double edge, this knife is an excellent replica of the Second Pattern Fairbairn/Sykes Dagger made famous by both British and US Commando groups during WWII.

Knife maker Brent Sandow grinds the blades for these Parkinson knives.

Price: $675.00 – IN STOCK

TRACE RINALDI TTKK

Blade Length: 4.25″

Overall Length: 9″

Blade Steel: S30V

Blade Finish: Black Powder Coating

Guard: Integral single guard

Handle Material: Black Micarta

Sheath: Custom Made Kydex sheath

Comments: Trace’s knives are extremely hard to come by. Thumb serrations along the top, single edge, full tang and multiple lanyard holes.

SOLD

TIM STEINGASS AK UTILITY

Blade Length: 4.5″

Overall Length: 8.75″

Blade Steel: D2

Blade Finish: Satin

Guard Material: Stainless Steel

Handle Material: Black Micarta

Sheath: Custom made leather sheath by maker.

Comments: Full tang, thumb serrations on top of blade, Stainless Steel tube-lined thong holes, and contoured handle for great ergonomics. Designed to decrease hand fatigue with extended use as a Hard Use Field knife.

Exclusively through Robertson’s Custom Cutlery.

SOLD

CLAUDIO SOBRAL FIGHTER

Blade Length: 6.5″

Overall Length: 11.25″

Blade Steel: San Mai w/Hamon

Blade Finish: Satin and Brute De Forge

Guard Material: Stainless Steel

Handle Material: Black Micarta

Sheath: Custom made leather sheath by maker

Comments: Great balance and handle ergonomics

Price: $1,000.00 – NOT IN STOCK

CLAUDIO SOBRAL HARPOON FIGHTER

Blade Length: 9″

Overall Length: 14″

Blade Steel: San Mai w/Hamon

Blade Finish: Satin

Guard Material: Stainless Steel

Handle Material: Black Micarta

Sheath: Custom made leather sheath by maker

Comments: Great balance and handle ergonomics; thong hole.

Price: $1,250.00 NOT IN STOCK

BILL LUCKETT TAC II 40th ANNIVERSARY DAGGER

Blade Length: 6″

Overall Length: 10.75″

Blade Steel: CPM 154

Blade Finish: Bead blast

Guard Material: Stainless Steel

Handle Material: Black Micarta

Sheath: Kydex Lined Cordua Nylon

Comments: Limited Edition 40th Anniversary. Concave grind on back side of blade, thong holes on guard and handle.

Price: $850.00 – IN STOCK

JIMMY LILE ORIGINAL SLY II

Blade Length: 9″

Overall Length: 14″

Blade Steel: D-2

Blade Finish: Two-Tone Satin and Mirror

Guard Material: Bead blasted 416 Stainless Steel

Handle Material: Stainless steel tube, Aluminum butt cap (with compass inserted), cord wrapped handle

Sheath: Original Johnson Sheathery custom made leather sheath.

Comments: This is an original Lile Sly II, not one of the copies that is currently being sold by another maker.

SOLD

CLAUDIO SOBRAL ANDES FIGHTER

Blade Length: 8.5″

Overall Length: 13.5″

Blade Steel: San Mai w/Hamon

Blade Finish: Satin

Guard Material: Stainless Steel

Handle Material: Black Micarta

Sheath: Custom made leather sheath by maker

Comments: Great balance and handle ergonomics

Photo by Chuck Ward

Price: $1,200.00 – NOT IN STOCK

VAUGHN NEELEY DA DAGGER

Blade Length: 8″

Overall Length: 13″

Blade Steel: 440C

Blade Finish: Mir

Guard and Pommel Material: Stainless steel

Handle Material: Black Micarta

Sheath: Custom made leather sheath

Comments: Full double edge, ¼” stock, serial number 002

SOLD

TODD BEGG PESSIMIST PROTOTYPE FIGHTER

Blade Length: 8″

Overall Length: 13″

Blade Steel: N690 Bohler

Blade Finish: Sniper Gray Cerakote

Guard: Integral double guard

Handle Material: Textured and contoured black Micarta

Sheath: Kydex sheath with Tek-Lok and a Kydex sheath set up with nylon to be worn as a shoulder rig.

Comments: There were two sets of these prototypes made; an A and B set. Each set had one 6″, 7″ and 8″ version and all the blades were ground the same.

This one is marked PROTOTYPE B. It is the largest knife in the B series. Only two sets of the custom versions were made!

Price: $1,250.00 – IN STOCK

TRACE RINALDI LEO

Blade Length: 4.25″

Overall Length: 10″

Blade Steel: S30V

Blade Finish: Bead blast

Guard: Integral single guard

Handle Material: Black Micarta

Sheath: Custom Made Kydex sheath

Comments: Trace’s knives are extremely hard to come by. Thumb serrations along the top part of the clip, the bead blasting has been removed from taking the knife in and out of the sheath Trace’s shop in. Single Edge, Full tang and multiple lanyard holes.

SOLD

VAUGHN NEELEY USN YORI TOSHI TANTO

Blade Length: 5-3/8″

Overall Length: 13.5″

Blade Steel: 440C

Blade Finish: Two tone Mirror on the hollows and bead blasted on the flat.

Guard and Pommel: Stainless Steel

Handle Material: Black Micarta

Sheath: Custom Made leather sheath

Comments: Serial Number 5 of 20.

SOLD

VAUGHN NEELEY SG FIGHTER

Blade Length: 7.5″

Overall Length: 12.5″

Blade Steel: 440C

Blade Finish: Micro bead blast

Guard and Pommel: Stainless Steel

Handle Material: Black Micarta

Sheath: Custom Made leather sheath with sharpening stone inserted in the back of the sheath

Comments: Double Edge, Full hidden tang, contoured guard, and handle features two finger grooves.

SOLD

BOB TERZUOLA M30 BATTLE GUARD

Blade Length: 6″

Overall Length: 10.75″

Blade Steel: ATS-34

Handle Material: Black Micarta

Sheath: Custom Made Kydex sheath

Comments: Bob Terzuola’s classic design!

Price: $975.00 – IN STOCK

RUSS ANDREWS BACK UP

Blade Length: 5″

Overall Length: 9.5″

Blade Steel: Elmax with a full double edge

Blade Finish: Satin

Handle Material: Grooved Brown Micarta

Sheath: Custom made leather sheath

Comments: Full tapered tang, red liners, only 5 Back Ups have been made and this is the only one ever made with Elmax. Excellent balance and handle ergonomics.

SOLD